View MB86H22B_676328.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Product Profile
MB86H22B
INTRODUCTION:
This SmartMPEG is an integrated MPEG-2 settop-box decoder which includes the hardware extensions required to support a low Bill of Material for Set-TopBoxes and IDTVs. Highlights of the SmartMPEG include an ARC RISC CPU (@130.5MHz), two transport stream demultiplexers with integrated DVB descramblers, a PAL/ NTSC/SECAM digital video encoder and a display controller, which overlays up to four layers of graphic data. A specially designed, shared SDRAM memory interface for the CPU and MPEG decoder connects to a single SDRAM device using either a 16 or 32-bit data bus depending on customer bandwidth requirements. The included universal processor interface allows simple connection to FLASH, hard disk drives (IDE), Common Interface and other asynchronous devices. The SmartMPEG is part of Fujitsu's MPEG decoder family, and is the successor to the MB87L2250. The SmartMPEG offers several advantages over the MB87L2250, including support for 16/32-bit SDRAM devices up to 128Mbytes, an integrated S/P-DIF interface, DPLL, and internal audio DAC's. This helps to reduce product cost by eliminating the need for external components. The SmartMPEG adds also DPLL functionality, SECAM encoding, and two Smart-card interface to former MPEG devices. To help our customers achieve the shortest possible timeto-market, the SmartMPEG comes with the Fujitsu Driver Application Programming Interface (FAPI). FAPI is a complete driver set, allowing fast and efficient customer software design. In addition, FAPI is now the standard programming interface for Fujitsu DVB components, easing migration to future devices.
Shared Memory S/P-DIF (Dolby Dig. Bitstream) I2S (Audio)
SmartMPEG
FEATURES
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
December 2004 Edition 1.1
FME/MM/PP/1204
MPEG-2 Decoder for ext. Temperature Range
MPEG2 video ISO/IEC 13818-2 (MP@ML...SP@ML) MPEG audio layer 1/2 32-bit RISC CPU (ARC Tangent A4 @130.5MHz) 4K I-cache, 2K D-cache Three timers / watchdog / power-down mode Shared memory interface (SDRAM, 16/32 bit data), 64Mbit...1Gbit Universal processor interface (IDE, NAND/NOR FLASH & Common Interface) Two transport stream decoders (decoding/recording) including two DVB descramblers Flexible MPEG video resizing (factor 1/16 to 2) Display controller with up to 4 true colour graphic or CLUT layers (total 6 layers) Flexible frame rate conversion (e.g. 50/60Hz) Flicker fixer for better on-screen text clarity Teletext / WSS / VPS / CC / VBID insertion PAL/NTSC/SECAM digital encoder RGB De-matrix (RGB or YCrCb output) Control of brightness, contrast and colour saturation of RGB and YCrCb output 5 video DAC's @10bit for analogue video / audio O/P ITU-R 656 video input/output (shared with TS2 input) S/P DIF output for PCM/AC3/MPEG UART / 2 x Smart Card IF / I2C / GPIO / PWM Output 7-segment LED controller for 5 digits / KeyBoard mon. Infra Red receiver / transmitter On-chip DPLL, requiring only 27.0MHz crystal Bootable from NOR Flash FPT-208P-M06 (LQFP-Package) Ambient Temperature Range: -40oC to +85oC Advanced Technology: Fujitsu 0.18m CMOS 1.8 volt device with 3.3 volt I/O Power consumption: typ. 700mW (Standby: 100mW)
Analog O/P: CVBS, YC, RGB ITU-R656 YCRCB, Audio R/L
SDRAM (64Mbit ... 1Gbit)
16/32 bit
ITU-R656
ARC@130.5MHz Tangent-A4
4K I-Cache PowerDown 2K D-Cache IRQ CTRL WatchDog 3 Timers
Shared Memory Interface
MPEG-2 Video Decoder MPEG Audio Decoder S/P-DIF Output Unit
Resizing TXT Insertion
Display Controller (2 x 2 Layer)
Digital Encoder (PAL/NTSC/ SECAM) Adjustable RGB De-Matrix
DAC1 DAC2 DAC3 DAC4 DAC5
WSS / VPS Insertion
CC/VBID Insertion
ITU-R656 Output
SmartMPEG Internal Bus @ 130.5MHz
HDD/IDE CTRL Boot ROM
DPLL
Buffer Mgr
DVB Descramblers TS3
intern
Chip Select CTRL
IR Rx
IR Tx
GPIO
GPI
GPO
TS Demultiplexers
Universal Processor Interface
NOR / NAND Flash HDD / IDE / CI
I2C
UART
2 Smart Card
PWM
7-Seg CTRL
TS1
Par/Ser
TS2
Par/Ser
27.0MHz
IRQ / I2C / 2 Smart Card UART / IR In / IR Out
GPIO / 7-Segment Ctrl PWM / KeyBoard Mon
Copyright (c) 2004 Fujitsu Microelectronics Europe GmbH
Preliminary
www..com Page 1 of 2
Disclaimer: The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering.The information and circuit diagrams in this document are presented "as is", no license is granted by implication or otherwise.
www..com
SmartMPEG
December 2004 Edition 1.1
FME/MM/DM/1204
MB86H22B MPEG-2 Decoder for ext. Temperature Range
Worldwide Headquarters
Japan
Tel: +81 3 5322 3353 Fax: +81 3 5322 3386
Asia
Fujitsu Limited Marketing Division Electronic Devices Shinjuku Dai-Ichi Seimei Bldg.7-1 Nishishinjuku 2-chome, Shinjuku-ku Tokyo 163-0721 Japan
Tel: +65 6281 0770 Fax: +65 6281 0220
Fujitsu Microelectronics Asia PTE Limited #05-08, 151 Lorong Chuan New Tech Park, Singapore 556741
http://edevice.fujitsu.com/
Fujitsu Microelectronics Korea Ltd. 1702 Kosmo Tower, 1002 Daechi-Dong Kangnam-Gu, Seoul 135-280, Korea http://www.fmal.fujitsu.com/ http://www.fmk.fujitsu.com/
Tel: +82 2 3484 7100 Fax: +82 2 3484 7111
USA
Fujitsu Microelectronics America, Inc. 3545 North First Street San Jose, CA 95134-1804 USA Tel: +1 800 866 8608 Customer Response Center Fax: +1 408 922 9179 Mon-Fri: 7am-5pm (PST) http://www.fma.fujitsu.com/
Tel: +1 408 922 9000 Fax: +1 408 922 9179
Europe
Tel: +49 6103 690-0 Fax: +49 6103 690122
e-mail
Fujitsu Microelectronics Europe GmbH Am Siebenstein 6-10 D-63303 Dreieich-Buchschlag Germany multimedia_info@fme.fujitsu.com
http://www.fme.fujitsu.com/
All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document are presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that Fujitsu will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government will be required for export of those products from Japan. Use of this product in any manner that complies with the MPEG-2 Standard is only permitted with a license under applicable patents in the MPEG-2 patent portfolio, which is available from MPEG LA, LLC, 250 Stelle Street, Suite 300, Denver, Colorado 80206, URL: www.mpegla.com.
3
Copyright (c) 2004 Fujitsu Microelectronics Europe GmbH
Preliminary
Page 2 of 2
Disclaimer: The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering.The information and circuit diagrams in this document are presented "as is", no license is granted by implication or otherwise.

▲Up To Search▲

Price & Availability of MB86H22B

	To Download MB86H22B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .